. Setumo se Phahameng ka ho Fetisisa sa Pvc Pipe Production Line Manufacturer le Feme |Hegu

Botumo bo phahameng ba Pvc Pipe Production Line

Tlhaloso e Khutšoanyane:

Khoebo ea rona e ikemiselitse ho sebetsa ka bots'epehi, ho sebeletsa bareki bohle ba rona, le ho sebetsa ka theknoloji e ncha le mochini o mocha o tsoelang pele bakeng sa botumo bo phahameng ba Pvc ...


  • Theko ea mochini:20000 USD-40000 USD FOB
  • Delivery port:QINGDAO KOU
  • Sehlahisoa sa mantlha:SJ-65/33
  • Lisebelisoa tse so ntlafatsoe: PE
  • Bophara ba liphaephe:16 mm - 110m
  • Bongata ba lipara tsa hlobo:42-72 lipara
  • Lebelo la tlhahiso:2-12 m/min
  • Lintlha tsa Sehlahisoa

    Tshebeletso le tshehetso

    Ho botsa le ho ikopanya

    Li-tag tsa Sehlahisoa

    Khoebo ea rona e ikemiselitse ho sebetsa ka bots'epehi, ho sebeletsa bareki bohle ba rona, le ho sebetsa ka theknoloji e ncha le mochini o mocha kamehla bakeng sa botumo bo phahameng.Pvc Pipe Production Line, Ka monyetla oa tsamaiso ea indasteri, feme ka kakaretso e ikemiselitse ho ts'ehetsa litebello tsa ho ba moetapele oa indasteri liindasteri tse fapaneng.
    Khoebo ea rona e ikemiselitse ho sebetsa ka botšepehi, ho sebeletsa bareki bohle ba rona, le ho sebetsa ka theknoloji e ncha le mochini o mocha kamehlaMochini oa Pvc Pipe Extruder, Mochini oa ho etsa liphaephe oa Pvc, Pvc Pipe Production Line, Khamphani ea rona e akaretsa sebaka sa 20, 000 square metres.Re na le basebetsi ba fetang 200, sehlopha sa litsebi tsa theknoloji, phihlelo ea lilemo tse 15, mosebetsi o tsoileng matsoho, boleng bo tsitsitseng le bo ka tšeptjoang, theko ea tlhōlisano le bokhoni bo lekaneng ba tlhahiso, ke kamoo re etsang hore bareki ba rona ba be matla.Haeba u na le lipotso, ka kopo u se ke ua qeaqea ho iteanya le rona.

    Lintlha tse ka Sehloohong tsa mochini oa PE prestressed single wall corrugated pipe
    mochini oa peipi ea masenke o hatelitsoeng pele (1)

     PP/PE/PVC/EVA/PA Polasetiki e le 'ngoe ea lebota liphaephe tsa masenkeMochini o na le likarolo tse ngata tse kang matla a phahameng, ho feto-fetoha ha maemo hantle, ho hanyetsa mocheso o phahameng, ho hanyetsa kutu le ho senya. .

    PP/PE/PVC/EVA/PA Polasetiki e le 'ngoe ea lebota liphaephe tsa masenkeho ba le 'maraka o moholo o sebelisoang haholo masimong a terata ea likoloi, liphaephe tse fetisang likhoele tsa motlakase, lipeipi tse sireletsang tsa mabone le terata ea mabone, potoloho ea sesebelisoa sa mochini, li-tubes tsa moea le mochini o hlatsoang joalo-joalo.

    Mochini oa PE e kentsoeng ka polasetiki o nang le lebota le le leng

    mochini oa lipeipi oa masenke o hatelitsoeng pele (2)            mochini oa lipeipi oa masenke oa polasetiki o hatelitsoeng pele (5)

    Mochini oa PE prestressed phala e entsoeng ka masenke e etsang mochini Winder bakeng sa mochini oa PE prestressed corrugated pipe

      Khamphani ea rona e thehiloe ho tloha ka 1997, 'me e na le lilemo tse fetang 20 tsa boiphihlelo ba ho rekisa mochini oa polasetiki.Re ka fana kamochini o le mong oa lebota la masenke a phala,PE/PVC peipi ea masenke e habeli ea lebotamochini, PVC/PE/PPR mochini phala,mochini oa polasetiki, joalo-joalo ho latela litlhoko tsa bareki.

    Tekheniki parameter ea 50 - 110 limilimithara e le 'ngoe leboteng phala mochine oa phala

    Che.
    Ntho
    Paramethara
    1
    Sebaka sa bophara ba liphaephe
    50 mm-110 limilimithara
    2
    Mohlala oa Extruder
    SJ-65
    3
    Screw L/D
    33:1
    4
    Mofuta oa likoloi SIEMENS
    5
    Matla a extruder
    37kw
    6
    Matla a ho etsa mochini
    4 kw
    7
    Bongata ba hlobo
    72 lipara
    8
    Tsela e phodileng
    pholiso ea metsi
    9
    Lebelo la tlhahiso
    8-12 m/min
    10
    Tsela ea ho khoaela
    Ka tsela e iketsang

    Lintlha tsa mochini oa Prestressed single wall corrugated pipe extrusion

    phala ea masenke PLC MOLAOLI          mochini oa lipeipi tsa masenke (16)             sefefo

    Khabinete ea motlakase Ho etsa mochini oa Winder


  • E fetileng:
  • E 'ngoe:

  • 1, MELAO EA TIISETSO: 

    1.1 TIISETSO NAKO:LIKHOELI 12, HO TLOHA LETSATSI LA PELE LA MECHINA E SEBELISANG LEBOLONG LA BATHO BA BATHO.

    1.2 MOREKISI O TLA FANA: LITŠEBELETSO LE LIKAROLO TSE SEKETSENG,TŠEBELETSO EA MAHALA KA NAKO EOHLE EA TIISETSO EA LIHLOOHO.

    1.3 TŠEBELETSO EA BOPHELO:MOREKISI O LOKELA HO FANA KA TŠEBELETSO EA BOPHELO BA NAKO EA BOPHELO BA LITHO TSE REKIsitsoeng, MOREKI A LEFA LIKAROLO TSE HLOKANG KA MOR'A MELAO EA TIISETSO EA LIKHOELI 12.

    2, MAEMO A HO PHELA:

    2.1 BOEMO BA HO PHELA:FOB QINGDAO KOU.

    2.2 NAKO EA HO FIHLELA:KA MATSATSI A 60 A HO SEBETSA KA MOR'A HO FUMANA TEFO E TSOHLE, MOREKISI O LOKELA HO TSEBISA MOREKI HORE A ETSE HLAHLOBO.MOREKISI O TSHWANETSE HO QETELA HO PAKA LITHO LE HO LOKELA HO THUSOA KA MATSATSI A 15 A HO SEBETSA KA MOR'A MOR'A MOREKISI A AMOHILE TEFO E FELETSENG.

    2.3 TSAMAISO EA HO LOADING:MOREKI O TSHWANETSE HO TSEBISA MOREKI KA NAKO E LEBANG HO LAOA KA NAKO, MOREKI A KA HLOKELA HO HLOKOMELA HO LAOLWA.

    3, HLAHLOBO: 

    HA MOCHINTŠI O QETILE, MOREKI O LOKELA HO TSEBISA MOREKI HO ETSA TLHAHLOBO PELE HO THUSOA, MOTHEKI O HLOMELA MOSEBETSI OA MOLEMO OA LITHO TSOHLE tse rekisitsoeng.MOREKISI O FIHLELA LITEHELO TSA TLHOKOMELISO BAKENG SA TLHOKOMELISO EA MACHINE.MOREKI O TLA TLA FEDKENG YA MOREKI HO TLA ETSA MOSEBETSI OA HLAHLOBO, KAPA MOREKI A KA ABELA KAROLO EFE EFE EA BORARO HO TLA FKKENG EA MORETSI HO TLA ETSA MOSEBETSI OA HLAHLOBO.

    4, KOMISI EA HO KENYA LE LISEBETSI: 

    HAEBA MOREKI A HLOKA, MOREKI O TSHWANETSE HO ROMELA THIMI YA TECHNICIAN FACTORY YA MORKI HO KENYA LE HO LEKOLA MORA OHLE.

    Haeba ho na le thahasello ho mechini ea rona, ka kopo ikutloe u lokolohile ho ikopanya le rona:

    Lengolo-tsoibila:info@tongsanextruder.com      info@wpcmachinery.com

    Mohala: 0086-13953226564
    TEL:0086-532-82215318

    Aterese: The West End le South Side Of Yangzhou Road, Jiaozhou City, Qingdao, China

    Moqoqo oa Marang-rang oa WhatsApp!