2100mmPP mbukota mpempe akwụkwọ mmepụta ahịrị: a na-eji ya eme mpempe akwụkwọ oghere PP nke a na-eji eme igbe nkwakọba ihe
PC/PE/PP Hollow Grid Plate Extrusion LinePP oghere mpempe akwụkwọ na-eme igwe, PP ejima mgbidi mpempe akwụkwọ eme igwe, PP mbukota igbe mmepụta akara, PP corrugated mpempe akwụkwọ extrusion akara.PP mbukota mpempe akwụkwọ mmepụta ahịrị
Nke a PP mbukota mpempe akwụkwọ mmepụta ahịrị ghọtara na-aga n'ihu mmepụta nke PC/PE/PP oghere grid efere, nke ọdabara na-ewu ihe ndozi, mgbasa ozi collocation, na mkpọtụ mkpuchi nke okporo ụzọ yana nkwakọ.PE/PP oghere grid efere bụ ezigbo nnọchi maka igbe akwụkwọ n'ime igbe nkwakọ ngwaahịa.A na-eji ya dị obere arọ, ike dị elu, ihe mgbochi mmiri na mgbochi corrosion mara ya.obosara nke ngwaahịa bụ 1220-2100 mm, na ọkpụrụkpụ bụ 2 mm-12 mm.
Foto igwe maka ahịrị mmepụta mpempe akwụkwọ PP:
1, ihe na-agwakọta silo maka PP nkwakọ ngwaahịa mpempe akwụkwọ: a na-eji ya maka ịgwakọta ihe PP na-ejuputa masterbatch na agba masterbatch.
2, Extruder maka PP mbukota mpempe akwụkwọ mmepụta ahịrị:The pụrụ iche e mere ịghasa na elu njikwa usoro na-ahụ na magburu onwe palatalization, elu mmepụta na kwụsie ike extruding.
Ọ bụrụ na ndị ahịa chọrọ iji ihe eji emegharị ihe, anyị nwekwara ike ịkwado ahịrị co-extrusion maka ime mpempe akwụkwọ oghere PP okpukpu abụọ, oyi akwa dị n'ime nwere ike iji ihe PP emegharịrị, na akwa oyi akwa nwere ike iji ihe PP ọhụrụ.
3, anwụ isi na ebu maka PP mbukota mpempe akwụkwọ mmepụta akara:anyị nwere ike kwadebe ndị na-anwụ anwụ isi na calibrator maka dị iche iche obosara, dị ka 1220mm, 1700mm, 2100mm, 2300mm,2500mm
Ihe na-agbanwe ihuenyo maka ahịrị mmepụta mpempe akwụkwọ PP: Onye na-agbanwe ihuenyo ngwa ngwa nke sistemu hydraulic na-eme ka usoro mgbanwe ihuenyo dị mkpụmkpụ.Ọnọdụ okpukpu abụọ jikọtara ya na usoro mkpuchi pụrụ iche na-ekwe nkwa ịrụ ọrụ nke onye na-agbanwe ihuenyo kwụsiri ike.
Mould: Ebu adopts elu-edu alloy ígwè na throttling ngwaọrụ iji hụ na ọbụna nrụgide nke ndepụta mmetụta na ebu egbugbere ọnụ, na-dị iche iche edinam nke elu-ala ibe nkwa ọbụna ọkpụrụkpụ nke efere.
Oghere calibrating tebụl maka ahịrị mmepụta mpempe akwụkwọ PP:Usoro ikpo ọkụ na-ekpo ọkụ na usoro jụrụ oyi nke ọsọ ọsọ na sistemụ calibrating na-agbanwe nke ọma na nke ọma na sistemu agụụ, nke na-eme ka nhazi nkenke.Sistemụ Vacuum mejupụtara sistemu abụọ nọọrọ onwe ha ma nwee nke ọ bụla nwere ahịrị oghere na-ekesa nke nwere ụdị ntụpọ atọ.Ka ọ dị ugbu a, ahịrị ọ bụla na-ebu sistemu na-achịkwa agụụ yana sistemu ngosipụta oghere nke na-achọpụta ọbụlagodi ogo oghere nke elu efere.
Traktọ maka PP mbukota mpempe akwụkwọ mmepụta ahịrị: Enwere traktọ abụọ.Nke mbụ bụ ike dị elu, oke mbelata dị elu, ụdị multi-roller, arụ ọrụ dị ala nke ọma, nnukwu traction ma nwee ike ịdọrọ efere ahụ site na tebụl calibrating nke ọma na synchronous.Emebere nke abụọ iji wepụ nchekasị, na mgbakwunye na ọ na-eji ngwaọrụ na-egbutu ọnụ iji hụ na obosara dị mma na nke dị mma nke n'akụkụ ya.
Mwepu nrụgide maka ahịrị mmepụta mpempe akwụkwọ PP: The elu nnukwu ebe conductive kpo oku mode nwere ike n'ụzọ dị irè wepụ nchegbu nke efere na n'ihu imezi larịị nke efere.
Igwe na-egbutu maka ahịrị mmepụta mpempe akwụkwọ PP:Ezi nzi ogologo-ofu ọnwụ na akpaka elu-ala ịwụsa usoro jikọtara na alloy ígwè nkọ agụba aghọta elu àgwà nke ọnwụ.
Ngwaahịa ikpeazụ na ngwa emere site na ahịrị nrụpụta mpempe akwụkwọ PP
1, OKWU AKA AKA:
1.1 OGE KWERE:Ọnwa iri na abụọ, malite n'ụbọchị mbụ nke igwe eji agba ọsọ n'ụlọ nkwakọba ihe ndị ahịa.
1.2 Onye na-ere ahịa ga-enye: Ọrụ na akụkụ mapụtara,IHE NDỊ MMADỤ NA-ECHICHE N'AKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWASỊA nile.
1.3 OKWU NDỊ MMADỤ:Onye na-ere ahịa kwesịrị inye ọrụ ndụ maka ngwongwo erere, onye na-azụ ahịa na-akwụ ụgwọ maka akụkụ mapụtara nke achọrọ ma agwụchaa usoro ikike ọnwa 12.
2, Ọnọdụ nnyefe:
2.1 Ọnọdụ Mbupu:Ọdụ ụgbọ mmiri FOB QINGDAO.
2.2 OGE MAKA:N'ime ụbọchị ọrụ 60 ka ọ nwetasịrị ugwo ugwo, onye na-ere ahịa kwesịrị ịgwa onye zụrụ ahịa ka ọ mee nyocha.ONYE na-ere ahịa kwesịrị ịkwụsị ibu ngwaahịa ma dị njikere maka mbupu n'ime ụbọchị ọrụ iri na ise ka onye na-ere ahịa natara ụgwọ zuru ezu.
2.3 Nlebaanya nke ibu:ONYE na-ere ahịa kwesịrị ịgwa onye na-azụ ahịa oge na-ebu ibu, onye na-azụ ahịa nwere ike ịhazi maka nlekọta nke ibu.
3, Nyocha:
MGBE igwe ahụ gwụchara, onye na-ere ahịa kwesịrị ịgwa onye na-azụ ahịa ka ọ mee nyocha tupu mbupu, onye na-ere ahịa na-akwado ihe ọma arụ ọrụ nke ihe niile rere ere.Onye na-azụ ahịa kwesịrị ịbịa n'ụlọ ọrụ na-ere ahịa ka ọ rụọ ọrụ nyocha, ma ọ bụ onye na-azụ ahịa nwere ike inyefe akụkụ nke atọ ka ọ bịaruo ụlọ ọrụ na-ere ere ka ọ rụọ ọrụ nyocha ahụ.
4, Kọmishọna ntinye na akụrụngwa:
Ọ BỤRỤ na onye na-azụ ahịa chọrọ, onye na-ere ahịa kwesịrị iziga otu ndị ọkachamara na ụlọ ọrụ na-azụ ahịa maka ntinye na ịnwale ahịrị dum.
Ọ bụrụ na mmasị ọ bụla maka igwe anyị, biko nweere onwe gị ịkpọtụrụ anyị:
Email:info@tongsanextruder.com info@wpcmachinery.com
Ekwentị: 0086-13953226564
TEL: 0086-532-82215318
Adreesị: The West End na South Side nke Yangzhou Road, Jiaozhou City, Qingdao, China
